demostración 41 Resultados para "hydraulic ferrule fitting"
-
Video
SAE100 R9 R12 & EN856 4SP 4SH Accesorios para la reparación de mangueras hidráulicas sin ferrules de deslizamiento
No-Skive Ferrule for SAE100 R9 R12 & EN856 4SP 4SH Hydraulic Hoses No-Skive Ferrule product introduction The DPF4T-NK is a high-performance no-skive ferrule manufactured by DME, specifically engineered for heavy-duty hydraulic hose assemblies. It is designed to work with SAE100 R9/R12 and EN856 4SP/4SH high-pressure wire-wound hydraulic hoses, combining the strength required for extreme pressure applications with the convenience of a no-skive design. No-Skive Ferrule
-
Video
Compatibilidad química Instalación de mangueras hidráulicas
Dme&jde Hydraulic Hose Material Chemical Compatibility Fitting Specification Guide Product Introduction This is a professional DME&JDE Hydraulic Hose Assembly Installation & Technical Requirement Guide. It focuses on the key technical specifications and correct installation practices to ensure the safe and efficient operation of hydraulic systems. The guide covers critical aspects such as anti-twisting during installation, length tolerance under high pressure, minimum bending
-
Video
SAE J517 R17 Norma de manguera hidráulica reforzada con alambre trenzado manguera hidráulica
SAE J517 R17 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Product Introduction This is an SAE J517 R17 fluid hydraulic hose. Its internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness. For reinforcement, it adopts 1 layer of high tensile steel wire braid for sizes up to 1/2", and 2 layers of high tensile steel wire braid for sizes from 5/8" onwards. The outer covering is anti-abrasive synthetic rubber, which is
-
Video
SAE J517 R16 manguera hidráulica estándar de caucho sintético trenzado con alambre
SAE J517 R16 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Product Introduction This is an SAE J517 R16 fluid hydraulic hose, with its internal hose made of synthetic rubber that is extruded integrally without joints and of uniform thickness. Its reinforcement structure consists of 2 layers of steel wire braid, and the outer covering is anti-abrasive synthetic rubber which is resistant to oils, fuels and atmospheric conditions. For fittings, it is equipped with no
-
Video
4 capas de alambre de acero espiral SAE J517 R9 manguera hidráulica estándar resistente a la abrasión
SAE J517 R9 Standard Hose Wire Spiral Hydraulic Hose Hydraulic Hose Product Introduction The internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness; its reinforcement structure consists of 4 layers of steel wire spiral, and the covering is made of anti-abrasive synthetic rubber that is resistant to oils, fuels and atmospheric conditions. For its fittings, the ferrule adopts the No-skive Type DPF4T, and the insert is DPX4XX (X
-
Video
Cuatro capas de tubo de acero estándar tubo de alambre espiral tubo hidráulico SAE J517 R13
SAE J517 R13 Standard Hose Wire Spiral Hydraulic Hose Hydraulic Hose Product Introduction The internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness; its reinforcement structure consists of 4 layers of high tensile steel wire spiral for sizes up to 1', and 6 layers of spiral for sizes from 1-1/4' to 2'. The outer covering is anti-abrasive synthetic rubber that is resistant to oils, fuels and atmospheric conditions. For
-
Video
Mangueras hidráulicas personalizadas trenzadas con alambre estándar de manguera ISO 11237 R19
ISO 11237 R19 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Standard Hose This is an ISO 11237 R19 fluid hydraulic hose, with its internal hose made of synthetic rubber that is extruded integrally without joints and of uniform thickness. Its reinforcement structure consists of 2 layers of steel wire braid, and the outer covering is anti-abrasive synthetic rubber which is resistant to oils, fuels and atmospheric conditions. For fittings, it is equipped with no-skive
-
Video
BS EN 853 1ST Tubo hidráulico trenzado con alambre de acero Estándar 1 capa
BS EN 853 1ST Wire Braided Hydraulic Hose Standard Hose Hydraulic Hose Product Introduction Internal hose is made of synthetic rubber, extruded whole without joints and of uniform thickness. The reinforcement adopts 1 layer of steel wire braid, and the covering is anti-abrasive synthetic rubber with resistance to oils, fuels and atmospheric conditions. For fittings, the ferrule is No-skive Type DPF2T and the insert is DPX1XX (X can be chosen). The product is approved with
-
Video
Mangueras hidráulicas de encargo espirales del alambre SAE J517 R15 de alta resistencia estándar
SAE J517 R15 Standard Hose Wire Spiral Hydraulic Hose Hydraulic Hose Product Introduction This hydraulic hose is an SAE J517 R15 fluid hydraulic hose with a synthetic rubber inner tube extruded integrally without joints and of uniform thickness. Its reinforcement structure features 4 layers of high tensile steel wire spiral for sizes up to 1', and 6 layers of spiral for sizes from 1-1/4' to 2'. The outer covering is anti-abrasive synthetic rubber, resistant to oils, fuels and
-
Video
Elastómero fluido hidráulico estándar del poliéster del color del negro de la manguera del SAE R7 1 capa de trenza de la materia textil
Sae R7 Standard Hose Black Color Polyester Elastomer standard Hose product introduction The internal hose is made of PA (polyamide), with a reinforcement structure consisting of 1 layer of textile braid and a black PU (Polyurethane) covering. For its fittings, the ferrule adopts the No-skive Type DPFR7, and the insert is DPXR7-XX (XX is selectable). This hose is an SAE J517 R7 fluid hydraulic hose, approved by multiple certificates including MSHA, BV, GOST, IATF 16949, ISO
-
Video
SAE J517 R12 manguera estándar de alambre espiral manguera hidráulica de 4 capas
SAE J517 R12 Standard Hose Wire Spiral Hydraulic Hose Hydraulic Hose Product Introduction The internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness; its reinforcement structure is 4 layers of steel wire spiral, and the outer covering is anti-abrasive synthetic rubber that resists oils, fuels and atmospheric conditions. For fittings, it adopts no-skive Type DPF4T ferrule and DPX4XX insert (X is selectable). This hose is
-
Video
EN 853 2SN manguera hidráulica trenzada con alambre manguera hidráulica industrial
En853 2sn Wire Braided Hydraulic Hose Industrial Hydraulic Hose Hydraulic Hose product introduction Internal hose is made of synthetic rubber, extruded whole without joints and of uniform thickness. Reinforcement consists of 2 layers of steel wire braid. Covering is anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. For fittings, the ferrule is No‑skive Type DPF2T and the insert is DPX2XX (X can be chosen). This is a BS EN 853 2SN fluid
