показывая 69 Результаты "hydraulic rubber hose"
-
Video
Отсутствие типа Скиве Ферруле шланга гидросистемы для сборки шланга гидросистемы САЭ 100 Р5
No-Skive Type Ferrule for SAE 100 R5 Hydraulic Hose Assembly No-Skive Ferrule product introduction The DPF5T is a professional no-skive ferrule designed exclusively for SAE100 R5 hydraulic hoses, falling under the category of hydraulic hose fittings. As a key component for hose assembly, it features an innovative no-skive structure that eliminates the need to strip the outer rubber layer of the hose before crimping, which significantly simplifies installation steps, saves
-
Video
Гидравлический шланг с одной проволокой 1 слой 1SC гладкая крышка
1SC Smooth Cover Hydraulic Hose Single Wire Braided Hydraulic Hose product introduction The Smooth Cover 1SC Wire Braided Fluid Hose is a high-performance medium-pressure hydraulic hose from JDE's Deft Flex series, engineered with German technology for applications requiring extreme flexibility. It features a seamless extruded synthetic rubber inner tube, 1 layer of high-tensile steel wire braid reinforcement, and a smooth, anti-abrasive synthetic rubber cover. Designed for
-
Video
2SC гладкая крышка гидравлический шланг однопроводная плетены 2 слоя
2SC Smooth Cover Hydraulic Hose Single Wire Braided 2SC Smooth Cover Hydraulic Hose product introduction This hydraulic hose is constructed with a high-quality synthetic rubber inner tube, which is integrally extruded without joints and features uniform wall thickness to ensure stable fluid delivery and excellent tightness. The hose is reinforced with two layers of high-tensile steel wire braid, providing reliable structural strength and pressure resistance during long-term
-
Video
Ручное оборудование для испытаний гидравлических шлангов при высокой и низкой температуре
High Low Temperature Test Chamber Operation Manual For Hydraulic Hose Test Chamber Product Introduction This is the operation manual for the GDW-100 high-low temperature test chamber, a professional test equipment for hydraulic hose OEM solutions. The manual standardizes the full operation process of the high-low temperature test chamber, covering pre-test preparation, sample placement, temperature parameter setting, test operation, post-test inspection and shutdown. It
-
Video
EN853 1SN Стандартная шланговая крышка для гидравлических систем
EN853 1SN Standard Hose Wrapped Cover For Hydraulic Systems Standard Hose Product Name Internal hose: synthetic rubber, extruded whole without joints, of uniform thickness Reinforcement: 1 layer of steel wire braid Cover: Abrasion-resistant synthetic rubber (resists oils, fuels & atmospheric conditions) Working pressure: 40–250 Bar / 580–3625 PSI Impulse cycles: ≥150,000 times Temperature: -40℃ to +100℃ (intermittent 120℃) Standard Hose Specification Part Number Hose Size I.D
-
Video
EN856 4SH Стальной спиральный стандартный шланг SAE 100R12
EN856 4SH Steel Spiral Standard Hose SAE 100R12 Wrapped Cover Standard Hose Product Name Internal hose: synthetic rubber, extruded whole without joints, of uniform thickness Reinforcement: 4 layers of steel wire spiral Cover: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions Working pressure: 165–445 Bar / 2393–6453 PSI Impulse cycles: ≥ 400,000 Times Temperature: -40℃ to +100℃ (intermittent 120℃) Standard Hose Specification Part Number Hose
-
Video
BS EN 1360 1W Профессиональная проволока с плетеным жидкостью стандартный шланг 20 бар / 290 PSI
Bs En 1360 1w Professional Wire Braided Fluid Hose Fluid Hose product introduction Internal hose is made of synthetic rubber resistant to petrol and diesel fuel, extruded whole without joints and with uniform thickness, featuring anti-static electricity with R < 1MΩ. The reinforcement consists of 1 layer of steel wire braid. The covering is anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions, also with anti-static electricity R < 1 MΩ. The hose
-
Video
BS EN 1360 2T Текстильный плетённый шланг для жидкости 2 слоя высокая производительность
Bs En 1360 2t Textile Braided Fluid Hose High-performance Fluid Hose product introduction Internal hose is made of synthetic rubber resistant to petrol and diesel fuel, extruded whole without joints and with uniform thickness, anti-static with R < 1MΩ. Reinforcement consists of 2 layers of textile braid. Covering is anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions, also anti-static with R < 1 MΩ. Fittings include DPF2T no-skive ferrule and
-
Video
Двойные штуцеры гидравлического шланга Ферруле Скиве для сверхмощного спирального шланга САЭ Р13 Р15
Double Skive Ferrule for Heavy Duty Spiral Hose SAE R13 R15 Double Skive Ferrule product introduction The DPFR13 is a heavy-duty double skive ferrule produced by DME, specifically engineered for SAE R13/R15 spiral wire-wound hydraulic hoses. Designed to withstand the highest pressure and toughest operating environments, it is ideal for demanding applications in mining, construction, and oil drilling. Double Skive Ferrule spcification Part Number Ø D L - Inch mm mm DPFR13-10 5
