-
Vídeo
EN853 1SN Norma de cobertura de mangueira para sistemas hidráulicos
EN853 1SN Standard Hose Wrapped Cover For Hydraulic Systems Standard Hose Product Name Internal hose: synthetic rubber, extruded whole without joints, of uniform thickness Reinforcement: 1 layer of steel wire braid Cover: Abrasion-resistant synthetic rubber (resists oils, fuels & atmospheric conditions) Working pressure: 40–250 Bar / 580–3625 PSI Impulse cycles: ≥150,000 times Temperature: -40℃ to +100℃ (intermittent 120℃) Standard Hose Specification Part Number Hose Size I.D
-
Vídeo
EN 853 2SN Mangueira hidráulica de fio trançado Mangueira hidráulica industrial
En853 2sn Wire Braided Hydraulic Hose Industrial Hydraulic Hose Hydraulic Hose product introduction Internal hose is made of synthetic rubber, extruded whole without joints and of uniform thickness. Reinforcement consists of 2 layers of steel wire braid. Covering is anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. For fittings, the ferrule is No‑skive Type DPF2T and the insert is DPX2XX (X can be chosen). This is a BS EN 853 2SN fluid
-
Vídeo
SAE R7 Tubo de fluido hidráulico padrão Cor preta Poliéster Elastômero 1 camada de trança têxtil
Sae R7 Standard Hose Black Color Polyester Elastomer standard Hose product introduction The internal hose is made of PA (polyamide), with a reinforcement structure consisting of 1 layer of textile braid and a black PU (Polyurethane) covering. For its fittings, the ferrule adopts the No-skive Type DPFR7, and the insert is DPXR7-XX (XX is selectable). This hose is an SAE J517 R7 fluid hydraulic hose, approved by multiple certificates including MSHA, BV, GOST, IATF 16949, ISO
-
Vídeo
Abrasão hidráulica padrão da mangueira do SAE J517 R9 da espiral do fio de aço de 4 camadas resistente
SAE J517 R9 Standard Hose Wire Spiral Hydraulic Hose Hydraulic Hose Product Introduction The internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness; its reinforcement structure consists of 4 layers of steel wire spiral, and the covering is made of anti-abrasive synthetic rubber that is resistant to oils, fuels and atmospheric conditions. For its fittings, the ferrule adopts the No-skive Type DPF4T, and the insert is DPX4XX (X
-
Vídeo
Padrão de mangueira hidráulica trançada de fio de aço do EN 853 ø das BS 1 camada
BS EN 853 1ST Wire Braided Hydraulic Hose Standard Hose Hydraulic Hose Product Introduction Internal hose is made of synthetic rubber, extruded whole without joints and of uniform thickness. The reinforcement adopts 1 layer of steel wire braid, and the covering is anti-abrasive synthetic rubber with resistance to oils, fuels and atmospheric conditions. For fittings, the ferrule is No-skive Type DPF2T and the insert is DPX1XX (X can be chosen). The product is approved with
-
Vídeo
Mangueiras hidráulicas personalizadas trançadas com fio padrão da mangueira ISO 11237 R19
ISO 11237 R19 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Standard Hose This is an ISO 11237 R19 fluid hydraulic hose, with its internal hose made of synthetic rubber that is extruded integrally without joints and of uniform thickness. Its reinforcement structure consists of 2 layers of steel wire braid, and the outer covering is anti-abrasive synthetic rubber which is resistant to oils, fuels and atmospheric conditions. For fittings, it is equipped with no-skive
-
Vídeo
SAE J517 R16 Mangueira hidráulica padrão de borracha sintética trançada por fio
SAE J517 R16 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Product Introduction This is an SAE J517 R16 fluid hydraulic hose, with its internal hose made of synthetic rubber that is extruded integrally without joints and of uniform thickness. Its reinforcement structure consists of 2 layers of steel wire braid, and the outer covering is anti-abrasive synthetic rubber which is resistant to oils, fuels and atmospheric conditions. For fittings, it is equipped with no
-
Vídeo
SAE J517 R17 Mangueira hidráulica reforçada padrão
SAE J517 R17 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Product Introduction This is an SAE J517 R17 fluid hydraulic hose. Its internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness. For reinforcement, it adopts 1 layer of high tensile steel wire braid for sizes up to 1/2", and 2 layers of high tensile steel wire braid for sizes from 5/8" onwards. The outer covering is anti-abrasive synthetic rubber, which is
-
Vídeo
4 camadas de tubulação de aço padrão tubulação de fio espiral tubulação hidráulica SAE J517 R13
SAE J517 R13 Standard Hose Wire Spiral Hydraulic Hose Hydraulic Hose Product Introduction The internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness; its reinforcement structure consists of 4 layers of high tensile steel wire spiral for sizes up to 1', and 6 layers of spiral for sizes from 1-1/4' to 2'. The outer covering is anti-abrasive synthetic rubber that is resistant to oils, fuels and atmospheric conditions. For
